OMR S.p.A., leading company in the automotive industry, employs sheet metal- and tube bending processes to produce excellent automotive components.
Sheet metal bending
OMR uses latest-generation press brakes with tonnages ranging from 20 to 320 TON, capable of working with sheets between 1 and 15 mm thick, and up to 3 meters long. These machines, equipped with numerical control, not only bend the material, but continuously monitor the bending angle, automatically correcting any deviations due to the springback effect. Each individual press is programmed to perform an automatic bending sequence, with the program loaded directly into the machine.
The machine always hosts a control template on board to verify the quality of the product. Validation is performed both during the setup phase and at intervals with a pre-established frequency. OMR is able to handle a wide range of materials, from conventional steels to high-strength steels.
This approach ensures that each piece respects the tolerances specified in the technical drawings, thus guaranteeing quality and compliance with customer requirements.
Tube bending
OMR also stands out in tube bending, operating on circular and square sections with diameters up to 80 mm and thicknesses up to 6 mm. The machines used for this process are highly automated and allow for various operations, such as flattening the ends and drilling. In the same department there is a system for closing the ends of the tubes, where the material is heated to occlude one extremity, ensuring a safe and long-lasting closure.
A master of the finished piece is always present on board the machine to ensure product compliance. In the event that there are multiple bending sequences, the machine moves the tools and the tube so that it can be bent in the same operation, optimizing the production process.
Possible applications range from support structures for mudguards to aerodynamic kits, from frame crosspieces to various supports for footboards and various tie rods.
Quality is fundamental for OMR business model. Each stage of the production process is carefully monitored, with integrated quality control systems that verify the conformity of the finished products. The company continuously researches available and advanced technologies to maintain the ability to meet customer demands at the highest levels.